Scenes from the installation of a 3-effect evaporator for a dairy application at a customer site with low building height. The CALORIS FLEXMODE® Evaporator is direct steam heated.
Above is a ground-level view of the 3-effect evaporator, with feed balance tank and holding tube. Below is an under-deck view of the first-effect evaporator, showing the de-superheat steam inlet that supplies the system with its heat source.
Above is a top-deck view showing 4 pre-heaters in-line and our recirculating valves above, which feed product into each effect. Below shows a similar view, but also shows the tops of the calandrias/evaporators.
Above is a top view showing calandria/evaporator lid and recirculating valve. Below is a top view of the calandria/evaporator, which comes with a hoist support to remove lids for inspection or cleaning.
Above are chemical storage tanks that supply the evaporator and the rest of the plant for CIP.
Visit our YouTube channel for more product information, archived webinars and more.